Description

The board DB-1 simulates home distribution network.  It enables to demonstrate the method of carrying out the following tests:

• Short-circuit loop impedance.
• RCD security parameters (switch 30mA)
• Earth resistivity.
• Earthing resistance.

The measurement of the method:

• Continuity of connections.
• Insulation resistance.
• Voltage measurement.

Simulation of irregularities:

• Short-circuit loop impedance for the evaluation of automatic supply disconnection.
• RCD disconnection time and current.
• Earthing resistance.
• Earth resistivity.
• Continuity of equipotential bondings.
• Insulation resistance.
• Mains power voltage.

It is possible to simulate typical faults and irregularities in the power network.

Download Datasheet DB-1

Description

DB-Thermo demonstration board is an essential device for training on non-contact temperature measurement or thermal imaging.

DB-Thermo helps to understand emissivity effects of various materials and material surface type effects which influence temperature measurement.

DB-Thermo set includes a manual describing all infrared measurement issues. The device is protected by a solid case with removable lid.

DB-Thermo hot plate has 0.96 emissivity, also includes various common material samples with different emissivity and matt or polished surface.

User has ability to set temperature from 40 °C to 60 °C which is displayed in real time on the LCD display.

Download Datasheet DB-Thermo

Description

Multimeter CMM-10 has been designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, temperature and also for testing diodes and continuity.

Download Datasheet CMM-10

Description

The CMM-11 multimeter is designed for quick diagnostics of devices and electric circuits. Thanks to an ergonomic design and pocket size, CMM-11 will find a place in every tool bag and will not take much space. It has all basics measuring functions, and thanks to the rubberized housing is not endangered by falls from up to 2,5 meters and mechanical damages. It’s the perfect solution for every electrician, fitters, installers and maintenance services.

Download Datasheet CMM-11

Description

Industrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.

Download Datasheet CMM-40

Description

The CMM-60 multimeter allows you to record data thanks to the Trend Capture function of the built-in memory as well as the possibility of transferring data and analysing the results achieved in the CMM-60 Multimeter Software.  The device facilitates the diagnostics of potential problems covering the operation of electromechanical devices, industrial automation, motors and distribution of electricity. Precise indications, safety during work in industrial conditions, convenience of use and early detection of irregularities in the operation of machines and devices are the main benefits of having this device in your equipment.

Download Datasheet CMM-60

Description

The CMP-1006 is a digital clamp-on multimeter. Measure AC/DC current and voltage in True RMS, up to 1000A and 600V. INRUSH current in start-up phase of an electrical device can also be measured. Measurements of resistance, frequency and temperture are also possible.

Download Datasheet CMP-1006

Description

The CMP-200 digital clamp meter has been designed for clamp measurements of AC leakage current.

Download Datasheet CMP-200

Description

Digital Clamp On Multimeter

Standard accessories:

• Test leads (2 pcs.)
• 9 V battery
• K type temperature probe
• Case
• User manual
• AC current measurement (TRUE RMS) up to 1500 A and DC up to 2000 A.
• Measurement of INRUSH current in start-up phase of electrical device.
• AC voltage measurement (TRUE RMS) up to 750 V and DC up to 1000 V.
• Resistance measurement and continuity test: continuity test with acoustic signalling (beeper) for resistance below 30 Ω.
• Capacitance measurement.
• Temperature measurement (Fahrenheit or Celsius).
• Frequency measurement.
• Duty cycle measurement.
• Diode test.

Download Datasheet CMP-2000

Description

Possible Measurements:

• AC current measurement
• AC/DC voltage measurement up to 600V.
• Resistance measurement and continuity test: continuity test with acoustic signalling (beeper) for resistance below 50Ω.
• Temperature measurement (Fahrenheit and Celsius units).
• Frequency measurement.
• Diode test.

Additionally:

• Safe, insulated measuring clamps.
• Double molded housing.
• Autoranging/manual range selection.
• DATA HOLD function, for holding measured values.
• Backlit LCD.
• REL function.
• Over range indication.
• AUTO-OFF function.

Download Datasheet CMP-400